Transmission tool used to remove O rings, gaskets, springs and great for removing snap rings

Removes O rings, gaskets, springs and great for removing snap rings, remove check balls

Removes O rings, gaskets, springs and great for removing snap rings

AOD/AODE Spiral  This Problem Solver deals with this problem:* Loss of stock AOD snap ring off the intermediate sprag retainer, causing failure of the sprag.1. The Superior AOD/AOD-E Spiral “Plus” Ring Kit is designed not to fly off the intermediate sprag, even under high RPM. This New Millennium design features a two-piece set with the Spiral Ring and a G-Lock ring that dramatically increases holding capacity of the retaining rings. In the Superior lab, this set has been tested on a dynamometer over 16,000 RPM2. The Superior K010 Spiral “Plus” Ring Kit is the same, easy-to-install ring kit that is included in the Superior AOD-E Shift Correction Package.3. The AOD/AOD-E Spiral “Plus” Ring Kit is packaged in handy three-packs and is a MUST for AOD rebuilds.4. This ring kit will also service the diode sprag from Ford.

Intermediate Sprag Retainer

4-6 required

The OE. valve will wear the end of the valve land and the edge surface of the valve body bore. This wear causes a loss of line pressure and boost response.Our valve extends the problem land area where the wear occurs and moves the working area more into the valve body bore that has not worn. The extended land gives the valve more stability to help prevent future wear.This valve will work on all years 1992 through 2005.